Lances, Brushes, Guns, Nozzles

Easywash365+ swivel joint in a blue housing. Installed between the lance and the trigger gun or handle. Often used on brushes 90cm long or longer. The swivel makes the lance much easier to handle while washing.

Swivel joint in a black housing, made by R+M Suttner. Fitted between the lance and the trigger gun/handle. Often used with brushes 90cm or longer. The swivelling action makes it much easier to handle the lance while washing.

Stainless steel lance with a corrugated heat shield. Length 120cm, G1/4" thread.

Stainless steel lance with a corrugated heat shield. Length 150cm, G1/4" thread.

Classic, lightweight stainless steel lance with a corrugated heat shield. Length 60cm, G1/4" thread. This model is often used in Ehrle car washes.

MV20 pre-wash lance, 600mm long, with an Aura trigger gun (freeze stop) and a nozzle guard. The set does not include a nozzle. The lance can be straight or bent. This set with a 65.56 ceramic nozzle was factory-fitted in Ehrle car washes made before 2013.

MV20 pre-wash lance, 600mm long, with an Aura trigger gun (weep) and a nozzle guard. The lance can be straight or bent. The set does not include a nozzle. Nozzles are sold separately, and a wide range is available in the nozzles section. Both metal and ceramic nozzles with a 1/4” thread fit this lance.

MV20 touchless wash lance, 600mm long, with MV925 trigger gun (freeze stop) and nozzle guard. The set does not include a nozzle. The lance is available straight or angled. This set with a 65.56 ceramic nozzle is commonly found on Ehrle car washes.

MV20 touchless wash lance, 600mm long, with MV925 trigger gun (weep) and nozzle guard. The lance is available straight or angled. The set does not include a nozzle. Both metal and ceramic nozzles with a 1/4” thread fit this lance.

Stainless steel lance with a corrugated heat shield. Length 90cm, G1/4" thread. This model is often used together with a brush.

MV20 touchless wash lance, 900mm long, with MV925 trigger gun (freeze stop) and nozzle guard. The lance can be straight or bent. The set does not include a nozzle.

MV20 touchless wash lance, 900mm long, with MV925 trigger gun (weep) and nozzle guard. The lance can be straight or bent. The set does not include a nozzle.

Stainless steel lance, total length 60cm. Can be straight or bent. G1/4" thread. Black heat shield, 35cm long. Lance used in newer Ehrle car washes.

High-pressure flat-spray nozzle from the Lechler 602 series. Angle 40°. Flow 9.12 l/min at 100 bar. 1/4" thread.

High-pressure flat-spray nozzle from the Lechler 602 series. Angle 40°. Flow 10.26 l/min at 100 bar. 1/4" thread.